Suspension work

I finally got the electrics done so I can now work on the suspension. I installed the front height sensors and routed the air line for front bags. Great thing with the sensors are that they are mirrored and can be mounted at the same spot both sides. 

I didn't shorten the pushrod yet as I need to get the suspension range fighred out first. Probably will do that when I get the car on lift.

Looks like I can fit all but the tank to the spare wheel well. I haven't got the compressor yet but it will fit.

I drilled the holes too high as the moustache bar is right behind the well and there's really no room for stiff line.

And the electrics are done, only few connectors for dash harness are missing. All is hidden behind the dash and dash can be removed without disconnecting all wires.

After few boiled top coats I finally managed to paint the engine bay. Now I only need to finish the wiring for the lights, wipers and such and engine can be lifted back.

This is quite a mess. I decided to remove the wiring harness from the dash and mount it to the chassis. At the same time I will strip all unnecessary wires that are no longer needed.